TPU 1,75mm - Black RAL 9005 / D 58 Shore

Product informations:
 
TPU Filament - 1,75mm – Black RAL 9005 58 Shore D

• High Class TPU Thermoplastic Polyurethan Elastomers
• Weight: 1000g coiled on plastic reel (ABS) (gross weight: nearly 1200g)
• Diameter from 1,75mm, therefore compatible to most 3D printers in market.
• Constant diameter with very low tolerances.
• Spool Size: Outside: Ø 200m ; Inside: Ø 52mm; Thickness: 80 mm
• Colour: Black RAL 9005, little deviation possible.

 
Notes for using our filaments:
It is not possible to specify the printing temperature because of different behaviors of each printer model. We recommend printing a Temp-Tower via following link to find out the optimum working temperature:

https://www.thingiverse.com/thing:2430797

Technical Data OWLTPU58
 

Material	Thermoplastisches Polyurethan (TPU)
Physical state after print	ellastic
Colour RAL	black / RAL9005
Print temprature	240 - 260°C
Heated bed temperature	60°C
Toughness	58 Shore D
Thickness	1,18gr/cm3
Tensil strength	50 MPa
Elongation at break	400%
Stress at 20% elongation	13 MPa
Stress at 100% elongation	19 MPa
Stress at 300% elongation	41 MPa
E-modulus from tensile test	200 MPa
Tear strength	170 kN/m
abrasion	30 mm3
Compression set 23°C / 72h	40%
Compression set 70°C / 24h	50%
Tensile strength with 24 day storage in water of 80°C	35 MPa
Elongation at 42 day storage in water of 80°C	450%
Notched toughness (Charpy) +23°C	kB kJ/m2
Notched toughness (Charpy) -30°C	16%